Oregami
Repositories/oxedyne/fe2o3

oxedyne/fe2o3/fe2o3_graphics/tools/icc/fixtures.sh

5.2 KiB, 1 run, executable

created by r1870400018:68843, which is this file's identity for as long as the history lasts, whatever it is later renamed to

download · who wrote it · its history

1#!/bin/bash
2# Prints the numbers that tests/icc.rs holds, each from LittleCMS 2.17 (`transicc`, lcms2-utils) run
3# once over the swatch set. The test file carries the numbers; this script is how they were made, and
4# what to run to make them again.
5#
6# Ghostscript's profiles are AGPL and are read here from their system path only; none is copied into
7# the tree, and tests that read them are #[ignore]d. FOGRA39L Coated is the bundled profile.
8#
9# tools/icc/fixtures.sh > /dev/null # the reader's arrays on stdout, the descriptions on stderr
10# tools/icc/fixtures.sh xform > tests/icc/xform_data.rs # the transform's arrays, for tests/icc/xform.rs
11set -euo pipefail
12GS=/usr/share/color/icc/ghostscript
13FOGRA="$(dirname "$0")/../../data/icc/FOGRA39L_coated.icc"
14T="transicc -n"
15
16# Runs transicc over stdin and prints the last $1 numbers of each line, whatever the banner says.
17col() { $T "${@:2}" 2>/dev/null | grep -E '^[-0-9. ]+$' | awk -v n="$1" '{ for (i = 1; i <= n; i++) printf("%s%s", $i, i < n ? ", " : ""); printf("\n") }'; }
18arr() {
19 echo "const $1: &[$2] = &["
20 if [ "${2:0:1}" = "[" ]; then sed 's/^/\t[/; s/$/],/'; else sed 's/^/\t/; s/$/,/'; fi
21 echo "];"
22}
23
24# The 5-step RGB cube, red slowest, and a grey ramp of 18 steps.
25cube() { for r in 0 64 128 191 255; do for g in 0 64 128 191 255; do for b in 0 64 128 191 255; do echo "$r $g $b"; done; done; done; }
26ramp() { for i in $(seq 0 17); do echo "$((i * 15))"; done; }
27ramp3() { ramp | awk '{ print $1, $1, $1 }'; }
28corners() { for r in 0 255; do for g in 0 255; do for b in 0 255; do echo "$r $g $b"; done; done; done; echo "128 128 128"; }
29
30f6() {
31 # 1. RGB to grey, sRGB to the Ghostscript sGray (the sRGB curve on D50 Y): the 125-colour cube, then the ramp.
32 cube | col 1 -i '*sRGB' -o $GS/default_gray.icc | arr CUBE_GREY f64
33 ramp3 | col 1 -i '*sRGB' -o $GS/default_gray.icc | arr RAMP_GREY f64
34
35 # 2. RGB to XYZ (D50, percent), sRGB: the eight corners and mid grey.
36 corners | col 3 -i '*sRGB' -o '*XYZ' | arr CORNER_XYZ '[f64; 3]'
37
38 # 3. sGray to XYZ (percent): the grey ramp's Y.
39 ramp | col 3 -i $GS/default_gray.icc -o '*XYZ' | arr RAMP_XYZ '[f64; 3]'
40
41 # 4. The same cube through the Ghostscript default_rgb, for the #[ignore]d test of the matrix read from a file.
42 cube | col 1 -i $GS/default_rgb.icc -o $GS/default_gray.icc | arr CUBE_GREY_GS f64
43 corners | col 3 -i $GS/default_rgb.icc -o '*XYZ' | arr CORNER_XYZ_GS '[f64; 3]'
44
45 # 5. FOGRA39L Coated, relative colorimetric (A2B1), CMYK corners to Lab; C slowest, K fastest.
46 for c in 0 100; do for m in 0 100; do for y in 0 100; do for k in 0 100; do echo "$c $m $y $k"; done; done; done; done \
47 | col 3 -t1 -i "$FOGRA" -o '*Lab' | arr FOGRA_LAB '[f64; 3]'
48
49 # 6. Ghostscript default_cmyk, relative colorimetric (its three intents share one table; the perceptual one would add
50 # the black point compensation lcms forces whenever the other end is a version 4 profile, which the Lab space is):
51 # A2B corners to Lab, and B2A (a lut8) corners from Lab to CMYK.
52 for c in 0 100; do for m in 0 100; do for y in 0 100; do for k in 0 100; do echo "$c $m $y $k"; done; done; done; done \
53 | col 3 -t1 -i $GS/default_cmyk.icc -o '*Lab' | arr GS_CMYK_LAB '[f64; 3]'
54 for l in 0 100; do for a in -128 127; do for b in -128 127; do echo "$l $a $b"; done; done; done \
55 | col 4 -t1 -i '*Lab' -o $GS/default_cmyk.icc | arr GS_LAB_CMYK '[f64; 4]'
56
57 # 7. The descriptions, as `transicc -v3` prints them on the line after "Profile:".
58 for p in "$FOGRA" $GS/default_rgb.icc $GS/default_gray.icc $GS/default_cmyk.icc; do
59 echo "$(basename "$p"): $(echo '0 0 0' | transicc -v3 -i "$p" -o '*XYZ' 2>/dev/null | sed -n '/^Profile:/{n;p;q}')" >&2
60 done
61}
62
63# The transform's fixtures: LittleCMS 2.17 over a swatch set, each array one intent and one setting of
64# compensation (`-b`), named <profile>_T<intent>[B]. CMYK comes out as percent, grey as 0..255.
65swatches() {
66 for r in 0 128 255; do for g in 0 128 255; do for b in 0 128 255; do echo "$r $g $b"; done; done; done
67 for v in 16 48 80 112 160 192 224 240; do echo "$v $v $v"; done
68 echo "224 172 105"; echo "91 155 213"; echo "96 153 60"; echo "110 20 30"
69 echo "240 200 220"; echo "128 128 0"; echo "0 128 128"; echo "101 67 33"
70}
71cmyks() {
72 for k in 0 25 50 75 100; do echo "0 0 0 $k"; done
73 echo "100 0 0 0"; echo "0 100 0 0"; echo "0 0 100 0"; echo "100 100 100 0"; echo "100 100 100 100"; echo "50 50 50 0"; echo "0 50 100 20"
74}
75greys() { for v in 0 32 64 96 128 160 192 224 255; do echo "$v"; done; }
76# Prints one array per intent and compensation of `transicc` over stdin, the last $2 numbers of each line.
77sweep() {
78 local name=$1 n=$2; shift 2
79 local inp; inp=$(cat)
80 for t in 0 1 2 3; do
81 for b in "" "-b"; do
82 if [ "$t" = 3 ] && [ -n "$b" ]; then continue; fi
83 echo "$inp" | col "$n" -t$t $b "$@" | arr "${name}_T${t}${b:+B}" "$(if [ "$n" = 1 ]; then echo f64; else echo "[f64; $n]"; fi)"
84 done
85 done
86}
87xform() {
88 swatches | sweep FOGRA 4 -i '*sRGB' -o "$FOGRA"
89 swatches | sweep SWOP 4 -i '*sRGB' -o $GS/default_cmyk.icc
90 swatches | sweep RGB_GREY 1 -i '*sRGB' -o $GS/default_gray.icc
91 cmyks | sweep CMYK_GREY 1 -i $GS/default_cmyk.icc -o $GS/default_gray.icc
92 greys | sweep GREY_FOGRA 4 -i $GS/default_gray.icc -o "$FOGRA"
93}
94
95case "${1:-f6}" in
96 f6) f6;;
97 xform) xform | sed 's/^const /pub const /';;
98 *) echo "usage: $0 [f6|xform]" >&2; exit 2;;
99esac